Upgrade your zumo 590 to zumo 595 firmware

FAQ's for Garmin zumo models and nüvi models.
elooijenga
Berichten: 6
Lid geworden op: 11 jun 2019 11:10

Re: Upgrade your zumo 590 to zumo 595 firmware

Berichtdoor elooijenga » 09 aug 2019 12:06

elooijenga schreef:Device is working like a charm, no problems whatsoever. Only thing is, every time I connect it to Basecamp there's an update. That's not correct isn't it?


Sorry, my bad. I mean when I connect is to Garmin Express!
Gebruikersavatar
Marco
Moderator
Berichten: 2733
Lid geworden op: 21 mar 2008 13:42
Locatie: Amsterdam
Contacteer:

Berichtdoor Marco » 09 aug 2019 13:28

Difficult, normally after an upgrade of firmware the notification should be gone. Unless you have problems with the garmindevice.xml file where after starting up the latest versions are shown (file is written).

But if you have made the garmindevice.xml read only, then old firmware version is shown. So update garmindevice.xml manually to the correct firmware version number or make sure (just delete the xml file and reboot) that the xml can be read and written.
Marco.

Kennis en kunde van Outdoor, Sport en Motor GPS'sen van Garmin, Tripy, TomTom, Mio, Teasi, TwoNav.

Zie ook ons GPS Cursus aanbod en YouTube kanaal
.
elooijenga
Berichten: 6
Lid geworden op: 11 jun 2019 11:10

Berichtdoor elooijenga » 09 aug 2019 13:44

This is the xml file text. It's read and write

<?xml version="1.0" encoding="UTF-8" ?>
<Device xmlns="http://www.garmin.com/xmlschemas/GarminDevice/v2" xmlns:dtlx="http://www.garmin.com/xmlschemas/GarminDeviceExtensions/DataTypeLocation/v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.garmin.com/xmlschemas/GarminDevice/v2 http://www.garmin.com/xmlschemas/GarminDevicev2.xsd">
<Model>
<PartNumber>006-B2436-00</PartNumber>
<SoftwareVersion>460</SoftwareVersion>
<Description>Zumo 59X</Description>

I will try to remove the xml file. After rebooting I guess I have to remove the part 006 line again?
elooijenga
Berichten: 6
Lid geworden op: 11 jun 2019 11:10

Berichtdoor elooijenga » 09 aug 2019 17:15

Marco schreef:Difficult, normally after an upgrade of firmware the notification should be gone. Unless you have problems with the garmindevice.xml file where after starting up the latest versions are shown (file is written).

But if you have made the garmindevice.xml read only, then old firmware version is shown. So update garmindevice.xml manually to the correct firmware version number or make sure (just delete the xml file and reboot) that the xml can be read and written.


Problem solved, thanx.
frojak
Berichten: 5
Lid geworden op: 06 aug 2019 08:37

Berichtdoor frojak » 13 aug 2019 13:36

My device is working fine. I only have one problem and that is the connection with Spotify. It work perfect with bluetooth audio, but not with Spotify. I have tried several solutions but none has fixed the problem.

Does anybody have a fix for this? I am using an Samsung S8+, and a Scala Packtalk intercom.
Bassiebw
Berichten: 1
Lid geworden op: 25 mei 2015 11:38

Berichtdoor Bassiebw » 21 aug 2019 12:23

frojak schreef:My device is working fine. I only have one problem and that is the connection with Spotify. It work perfect with bluetooth audio, but not with Spotify. I have tried several solutions but none has fixed the problem.

Does anybody have a fix for this? I am using an Samsung S8+, and a Scala Packtalk intercom.


Have a look at https://community.spotify.com/t5/Ongoin ... 7#comments
Just change your bluetooth name of your zumo to "zumo 595"
Gebruikersavatar
Marco
Moderator
Berichten: 2733
Lid geworden op: 21 mar 2008 13:42
Locatie: Amsterdam
Contacteer:

Berichtdoor Marco » 21 aug 2019 15:08

Thanks, I put it in the start post.

zumo 595

And nothing else!
Marco.

Kennis en kunde van Outdoor, Sport en Motor GPS'sen van Garmin, Tripy, TomTom, Mio, Teasi, TwoNav.

Zie ook ons GPS Cursus aanbod en YouTube kanaal
.
TonD
Berichten: 4
Lid geworden op: 05 nov 2019 21:15

Berichtdoor TonD » 05 nov 2019 21:21

Done the upgrade from 590 to 595 at the beginning of this year, which did work fine.
Both the smartlink worked reasonable, and I could still share routes with my peer via Bluetooth

Zumo to Zumo sharing to his 590. This however was at that time with version 4.50 in the re-coded 595. Then however I made the mistake that with Garmin-Express the device got upgraded to 4.60. As of then I couldn't share routes anymore with my peer using his 590. As this was a nice feature during our mutual holidays, I want this feature back.

So lets try to re-code the 595 at version 4.60 back to 4.50, with the proper files of course.
This however didn't work, and it kept coming back with version 4.60.
Ok then lets try to go back to the 590 with version 3.30 again, which worked great.

Ok then lets go back to a 595 with the version 4.50, surprise it did come back again with 4.60.
And I did reload the original file from http://gawisp.com/perry/zumo/ and used the file

Zumo595_450.gcd to garantee that I had the right code, but again it came back with 4.60??

Anyone any clue?

rgds, Ton
Philipych
Berichten: 2
Lid geworden op: 14 apr 2019 16:10

Berichtdoor Philipych » 05 nov 2019 22:21

TonD schreef:
Zumo595_450.gcd to garantee that I had the right code, but again it came back with 4.60??

Anyone any clue?

rgds, Ton


delete the GUPDATE.GCD file in the System folder :-D
TonD
Berichten: 4
Lid geworden op: 05 nov 2019 21:15

Berichtdoor TonD » 06 nov 2019 20:20

@Philipych, many thanks that was indeed the solution. After removing the GUPDATE.GCD in the "hidden" systemfolder, and again loading the "Zumo595_450.rgn" into the device it came up with version 4.50. And looking now into the hidden systemfolder, there was no GUPDATE.GCD file available in there. So also no version including the 4.50 firmware. Note: with a hexeditor I did verify the contents of the prior GUPDATE.GCD, which indeed indicated that it did contain version 4.60 in it. So now again I will do some pairing tests with my peer having a 590 to see if we can interchange routes via Bluetooth. And will do some tests for the Smartlink feature. If those results are dissatisfying, I will go back to my "old" 590. Else I will stay on the 595 with version 4.50. This graph shows the comparison between the file on the Garmin from the .system directory with the correct file.

GUPDATE-vs-Zumo595_450.JPG
Laatst gewijzigd door TonD op 07 nov 2019 19:37, 1 keer totaal gewijzigd.
Gebruikersavatar
Marco
Moderator
Berichten: 2733
Lid geworden op: 21 mar 2008 13:42
Locatie: Amsterdam
Contacteer:

Berichtdoor Marco » 06 nov 2019 23:13

Is it possible that the GUPDATE file is in the \Garmin\ folder of the microSD card (or on the zumo itself)?
Marco.

Kennis en kunde van Outdoor, Sport en Motor GPS'sen van Garmin, Tripy, TomTom, Mio, Teasi, TwoNav.

Zie ook ons GPS Cursus aanbod en YouTube kanaal
.
TonD
Berichten: 4
Lid geworden op: 05 nov 2019 21:15

Berichtdoor TonD » 07 nov 2019 11:20

The GUPDATE.GCD file was on the Garmin itself in the
.system directory which is hidden, so you need to look on you windows versions how to show hidden folders first.
After deletion of that file, I was able again to "restage" my device back to version 4.50 on the 595, which seems to work way better for me then 4.60.

So far I've also performed some Smartlink tests by moving routes from Zumo to my phone and vice-versa, with good results. Hopefully the routes sharing in between my Zumo"595" and the Zumo590 from my peer will also work again. Which will most likely be tested in coming weekend.
TonD
Berichten: 4
Lid geworden op: 05 nov 2019 21:15

Berichtdoor TonD » 11 nov 2019 08:33

The route/track sharing tests have passed, sometimes needed some retries, but acceptable. So for the time being will stay at the 595 with 4.50 code.

Terug naar “Garmin zumo / nüvi”



Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers